Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Westy Lean Solution?
From:Stan Wilder
Date:Mon, 22 Jul 2002 09:35:19 -0500

Some people have added 1/2" shims under their springs. It sometimes
works.
My 83 Westy leans but I can't see that it hurts anything since it will
continue straight down the road at 70 mph without my holding the steering
wheel. My tire wear is consistent so I know it doesn't damage the tires.

Stan

On Mon, 22 Jul 2002 09:39:34 -0400 Jay L Snyder
<Jay.L.Snyder@USA.DUPONT.COM> writes:
> I believe the lean is caused by failed bushings in the trailing arms
> of the
> rear suspension.  Yesterday I was adjusting the camber of the
> driver's side
> rear wheel.  I was able to raise the driver's side by a 1/4", but I
> was
> maxxed out on the camber adjustment slot.  The tire is still in at
> the top
> a little (positive? camber).  If these bushings were replaced, I
> feel
> confident the riding height could be restored.  (Since some members
> have
> replaced the springs and even swapped them side to side without much
> luck,
> the problem has to be in the bushings.)  Anyone replaced these
> bushings?
> How hard is it and did it help with the Westy lean?
>
>
>    Jay
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.