Should be copper washers.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Dave Baker
Sent: Saturday, July 27, 2002 2:11 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Drain Plug Question

A quick question for the list:

Are there washers or some other type of gasket that fits over (i.e.,
under)
the coolant drain hex bolts on the bottom side of the heads on my 1.9 L
85?

I looked through my engine gasket kit and could only find one washer
that
fit the plug.  I would expect to find two, so my thoughts are I'm either
missing one, or a washer is not required here.

Thanks in advance (TIA).

Dave in KC
85 Westy