>The emblems are held in place primarily by double sided adhesive trim tape.
>Probably 3M. There are small studs which are then pushed onto plastic
>grommets. That is all. You can carefully pry the emblems off. I find they are
>much easier to remove on a warn sunny day. The adhesive gets a bit softer
>then. The studs in back are most likely used to locate the nameplate properly
>more than any other purpose (IMHO).

Try warming them GENTLY with a fanheater or hairdryer to soften the
adhesive, as you would with decals.
--
Andrew Grebneff
165 Evans St, Dunedin 9001, New Zealand
<andrew.grebneff@stonebow.otago.ac.nz>
Seashell, Macintosh, VW/Toyota van nut