It depends.  If it is on one of the ports that has the two bolts then that
is pretty easy.  Just take the bolts out, pull on the pipe a little with
your hand and the old gasket should come out.  Slide the new one in place,
and put the bolts back in.  If it is on one of the ports that has studs then
you would have to remove the studs and do the same thing (a little tricker
but not impossible.  Have fun!

Ken Wilford
John 3:16
http://www.vanagain.com
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Matthew Libby
Sent: Tuesday, July 30, 2002 7:40 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Exhaust Gaskets

Can the head to exhaust gasket be replaced without removing the rest of the
exhaust system? (2.1)

Matt