

| Subject: | Re: lugs and studs for alloy |
| From: | Harmon Seaver |
| Date: | Sat, 3 Aug 2002 08:01:33 -0500 |
So what did you do for the lugbolts in the front, which screw in to the hub? On Sat, Aug 03, 2002 at 09:48:13AM -0400, Helen Fahy wrote: > The website does say: "Installation requires a hole drilled and reamed to > .562 diameter. " This is meant to describe what is required for the stud to > fit into a previously undrilled hub, as you might have if you were building > a custom sand rail. These studs are VW wheel studs manufactured by > Sway-Away. > > There was no additional drilling or reaming necessary to install these studs > into a vanagon hub. They pressed into the hub with the correct interference > fit of 0.3-0.4mm(~0.012-0.016in). > > I used the 52mm long studs which are $3.00ea, the postage was more than the > studs as I wanted them fast. > > Helen & Joe Fahy > '87 Westy > > > ----- Original Message ----- > From: <BenTbtstr8@aol.com> > To: <72510.1173@compuserve.com>; <vanagon@GERRY.VANAGON.COM> > Sent: Saturday, August 03, 2002 5:32 AM > Subject: Re: lugs and studs for alloy > > > > > > In a message dated 8/2/02 5:44:16 PM Pacific Daylight Time, > > 72510.1173@COMPUSERVE.COM writes: > > > > << Here is where I picked mine up: > > > > > http://www.bugsandbuggies.com/Parts.asp?CN=914&SN=102&GN=13&Subgroup=Wheel+A > > dapters%2C+Mounting+and+Covers&RefPage=Sway-A-Way > > > > They were real good about shipping them out fast. >> > > > > Helen & Joe, et al. > > > > The one objection I have to these units is you have to ream (make the > bigger) > > the holes in your hub to fit them per the instructions on the webpage you > > noted above. There are aftermarket and factory studs available which do > not > > require you to alter your hubs. Not to mention cheaper than these guys. > You > > can also get Porsche studs which work w/o modifications but much pricier. > > > > At any rate, if anyone desperately needs longer rear studs, I can offer > some > > assistance as long as the number of requesters do not get overwhelming as > > they did in the past. > > > > BenT > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.362 / Virus Database: 199 - Release Date: 5/7/02 -- Harmon Seaver CyberShamanix http://www.cybershamanix.com
Have something to add on this topic today? Revive this thread in the forum »