Which linkage is this exactly?  I've had trouble getting into first and
second since I put a clutch in a couple of months ago.  I did separate the
front section from the rear section about midways under the vanagon, but I
don't remember there being any way of rotating the 'linkage' since it went
together with a bolt through a U-shaped piece on one end and cylinder on
the other.  Kind of reminded me of a U-joint.

Thanks

> [Original Message]
> From: Dan Barrett <dan@OFFTHEHILL.ORG>
> To: <vanagon@GERRY.VANAGON.COM>
 > Date: 8/6/02 4:54:15 PM
> Subject: linkage woes
>
> Folks,
> Prior to this morning, my bus would only shift into first if I pushed
down as
> if to defeat the reverse lockout.  From the archives, I found suggestions
to
> "rotate the linkage clockwise one notch" at the mid-van connecting point.
> So, I've loosened the clamp at the middle of the linkage, but now no
matter
> how I clamp things back together, the bus only shifts into third or
fourth.
> No reverse, no first or second.
> Where am I going wrong?  How can I "rotate the linkage"?  The frontmost
> section of the linkage doesn't appear to rotate at all.
>
> Best,
> d.

David Wilhite
84' Subaruvanagon
01' KLR 650