At 07:52 PM 8/13/02 -0400, George Averill wrote:
>The unit currently installed has no numbers on it.  The Bentley says that
"Two different types of Hall control units can be installed." (Fairchild or
AEG).  Does this mean that either will work?  How can I tell which one I
need.  84 Vanagon Digijet.
************************
George -

Actually, there were/are 3 manufacturers of the Hall Control Unit mounted
on the side firewall: Fairchild, Telefunken & Bosch.  And all three are
interchangeable.

Old VW Numbers
211905351B
211905351D

Current replacement from VW is 191905351B.  The replacement has a heat sink
attached to the back side of it for better heat dissapation when attached
to the existing finned heat sink, so be sure to use longer sheet metal
screws when attaching it.  I have one of these on my 84 Westy - works fine.

Ron at Bus Depot should be able to fix you up with either the old or new
style at a reasonable cost.  Sometimes you can't depend on the FLAPS to
keep from getting a generic "taiwan" made replacement.

Jus Passin Thru.....

JIm
84 Westy 2.1
"Ole Putt"
68 Beetle
"Xavier"
73 Ghia Coupe
"The Last Project"
jimt@oldvolkshome.com
jim96003@c-zone.net
***********
**Need to find the right dizzy?
http://www.oldvolkshome.com/ignition.htm
OR
http://www.oldvolkshome.com/ovhignbo.htm
**Upgrade your 83.5-85 Vanagon to 2.1
http://www.oldvolkshome.com/19to21.htm
***********