

| Subject: | Re: Question about breather pipe on 2.1L |
| From: | Marla Stelk |
| Date: | Fri, 16 Aug 2002 20:06:46 -0400 |
If the hose is starting to collapse from your oil breather then you should replace it with either oil resistant hose or with heater hose (heater hose will last about 2-3 years, oil resistant is better but harder to find). There are, I think is was, valves or something in the oil breather that helps it to maintain lower air pollution, etc. to be in tune with EPA regulations, but I can't remember the details. Check the archives because I just read some info. on what is inside of the oil breather from the mailing list. Lost power could be the result of a variety of problems, you need to do some diagnostics. Could be vanagon syndrome, could be fuel injection problems, could be oxygen sensor problems, etc. I'm having some similar problems right now, and I'm about to clean out my fuel injectors to see if that remedies the problem - trial and error. Hope this helps. Peace, Marla '87 Van "Morrison" 2.1L Digifant >From: Tim Marciniak <tmarciniak@WI.RR.COM> >Reply-To: tmarciniak@WI.RR.COM >To: vanagon@GERRY.VANAGON.COM >Subject: Question about breather pipe on 2.1L >Date: Fri, 16 Aug 2002 16:58:36 -0500 > >Is the crankcase breather pipe on the 2.1L just a straight pipe from >the crankcase or is there something inside this pipe. It seems >fairly substantial to be just a breather pipe but I suppose it has to >stand up to some high temperatures as well. Also the hose from this >pipe to the intact air ducts seems to be a little worn and seems to >be collapsing on itself, not totally yet but the hose is very >mushy--Is this normal. My van is driveable and starts fine, I'm just >trying to find out why it has lost power. I'm suspecting a vacuum >leak but cant tell for sure. Just did a basic tuneup hoping that >would cure this problem but it didnt. > >Tim >-- _________________________________________________________________ Join the world�s largest e-mail service with MSN Hotmail. http://www.hotmail.com
Have something to add on this topic today? Revive this thread in the forum »