Didn't look in the Bentley, but I am assuming you are referring to the
rear mounting bracket. There are actually three bolts that hold that
mount to the engine. @ are M10X85 X 1.5. The third is M10X28(30 will
do)X1.5. The original bolts were only grade 8.8. I like to use better to
get the better corrosion protection.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Joe
Sent: Tuesday, August 20, 2002 9:29 PM
To: vanagon@GERRY.VANAGON.COM
Subject: 2.1 L engine mount bolts

I picked up a used engine from a parts yard. The engine is missing the
two
bolts on Bently page 13.38 that go through the engine support, labeled
45 Nm
(33 ft lb). Does anyone know what size these bolts are and if they are
any
special grade. Thanks in advance.

J.R. Beckham
Narragansett Rhode Island
85 Westy
87 Wolfsburg
91 GL