Wow.....

Apparently nobody has two tables in their Westfalia.  Eleventy one responses
about the Cheap Westy That Got Away, but no table help.  :(     C'mon guys
and gals!  Help my Westy get complete and see the great outdoors in the
process.  Well, at least your driveway.

Please send your response/measurements to JOE65@aol.com as I will be turning
off the List tonight for the long weekend.

Joe in CO
84 Westy w/one leg
77 Targa

""""""""PREVIOUSLY ON VANAGON.COM"""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
 Still trying to figure out this table leg thing (so Ben can maybe ship me
the correct leg the first time!), and I was wondering if a few of you with
both tables and legs could go out to your Westy with a tape measure.

 I think I have the correct combination for the rear leg and table because
with the combo I have it "nests" perfectly into the area over the water tank
cabinet, completely out of the way of the rear seat.  The larger table (16
1/4" x 32" with an offset "turntable") appears to be the rear table.  The one
leg I have puts the top surface of my rear table 29" above the floor in front
of the fridge.

 My small table is 16 1/4" x 24", with a centered "turntable".  When I put
the one leg I have in the front, the table is about 34 1/2" off the floor,
and will just slide over the closed stove until the "turntable" mount
underneath hits the stove lid.

 I was wondering if a few of you could send me your table dimensions, their
locations F or R, and the heights off the main floor for both the front and
rear tables.  Also, if you could, let me know if the "reach" of the two table
legs are different...a measurement would be nice.  I'm trying to determine
if, and how, the two legs are different.