You may not have to glue it tho - I fixed mine just by pushing it back into place - I heard a click as it went back into its setting and its been fine since.  Use glue as a last resort.  There is a great write-up with instructions on this if you look into the archives.  Can't remember who its from -  Its results from pushing the button while you are driving.  Never do that or it will cause it to slip out of place again.

Peace,
Marla
'87 Westy Van "Morrison"
  
----- Original Message -----
From: Chris S
Sent: Friday, September 13, 2002 8:16 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: odometer quit
  
There's a gear at the end of your odometer that drives the whole assembly.
That gears is slipping on the steel odometer shaft.  Dissasseble
speedometer, gingerly glue gear,  reassemble.  Voila.

Chris,

'85 Westy.

P.S. Don't use too much glue as it will leak onto the adjacent spinning
numbers.

----- Original Message -----
From: "Andy Zappe" <Zapvw@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, September 12, 2002 9:00 PM
Subject: odometer quit

> well my speedometer is still working but the odometer just quit.  what do
i
> need to do?  its nothing to do with the cable is it?  any info would be
> greatly appreciated.
>
> thanks
>
> andy
> 80 vanagon L
> 85 westy - one with the odometer problem
>Get more from the Web.  FREE MSN Explorer download : http://explorer.msn.com