I was thinking about the coolant tower - the plastic "T" that sits
behind the starter. There is one end that is not connected to anything
that if you could tap the plastic, you could just screw the sensor in
there - however I don't know how leakproof it would be.

I suppose you could use one of the drain plugs in the heads as well -
but you would have to clearance the engine tin.

Todd

'88 Westy

kevin obrien wrote:

>I didn't get many responses to my post about where to
>put the coolant temp gauge sender. One idea is to tap
>& drill a hole in the upper half of the Thermostadt
>Housing...I'm waiting for a picture and will pass
>along the info to ya.   Any other ideas out there???
>
>--- Todd Last <Rubatoguy@MINDSPRING.COM> wrote:
>
>
>>If anyone has added an accessory coolant temperature
>>gauge,
>>I'd be interested in knowing where they installed
>>the temperature sensor
>>for the gauge.
>>
>>Also, are there other places to place an oil temp
>>sensor if you do not
>>want to use the oil drain plug?
>>
>>thanks,
>>
>>Todd
>>'88 Westy
>>
>>
>
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! News - Today's headlines
>http://news.yahoo.com
>
>
>