Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Timing on 84GL
From:The Old Volks Home
Date:Mon, 23 Sep 2002 16:59:36 -0700

At 06:19 AM 9/23/02 -0700, you wrote:
>Hi all,
>
>New question.  I was working on the GL Sunday and came across something that
>I never noticed before.  Maybe one of you can shed a little light on what is
>right.
>
>In the Benetley, it shows the timing marks on the pully.  One (U shaped) is
>for the TDC and the other (V) is for the timing.  For the Digijet, it only
>shows the V timing mark.  The DigiFant shows both.  At any rate, in the
>Benetley, it shows the U mark to the left of the V mark.  On my pully, it
>has the U mark to the right of the V and I have a Digijet.  Any thoughts?
************************
Hi William -

Ignore Bentley - The picture is intended for Digifants which are timed at 5
degrees BEFORE TDC, the "v" to the right of the "u".

Your pulley is correct with the "v" to the left of the "u" indicating 5
degrees AFTER TDC.  Your 84 is normally timed to that mark (although mine
runs better at 0 degrees TDC because of wear and tear on the dizzy over the
years).

JIm
84 Westy 2.1
"Ole Putt"
68 Beetle
"Xavier"
73 Ghia Coupe
"The Last Project"
jimt@oldvolkshome.com
jim96003@c-zone.net
***********
**Need to find the right dizzy?
Site Heavily Updated Sep 22, 2002!
Now with Type 3 & Type 4 Dizzy Listings!
http://www.oldvolkshome.com/ignition.htm
OR
http://www.oldvolkshome.com/ovhignbo.htm
**Upgrade your 83.5-85 Vanagon to 2.1
http://www.oldvolkshome.com/19to21.htm
***********

Have something to add on this topic today? Revive this thread in the forum »