And another problem arrives, i must have stripped the
metal hydrolic hose fitting apon removal from the
master cylinder....since the metal line is bent to fit
snug againts the Master Cyl. i pulled on it too hard
thinking it was off the threads. Its ruined...cant
find a part in the Bus-boys catalog OR Bus Depot.

Does anyone know where i can get this metal hydrolic
hose very fast?...i got hit by a car today while
riding my bike and its hard to walk since his bumper
nailed my knee!

Thanks for everyones help so far
Phil Stanhope 84 Westy Tiico

PS, How do the Germans adjust the Pushrod?,, the
Bentley gives it two "wrenches" which means "easy
job/simple tools"....they must use microscopic robot
octopuses.

--- "Phil S." <napszeerf@YAHOO.COM> wrote:
> Installed a new master Cyl. then tried to bleed the
> system but no pressure builds so i think the push
> rod
> need to be adjusted like my Bentley says...only
> problem is the Bentley does not say how. The push
> rod
> DOES have some play and no matter how many times i
> pump the clutch, it wont build pressure. How in the
> world does one reach up to loosen push rod lock nut,
> im a skinny lad and even i cant fit my hand in
> there!
>
> Anyone?
>
> THanks!!!
> Phil 84 Westy Tiico
>
> P.S I replaced the Slave cyl. a week ago.
>
> __________________________________________________
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com