You still have to bang some metal to allow manifold clearance with the below
mentioned manifold.

Alistair

--
'82 Westy -> diesel converted to gas in '94
albell@uvic.ca
http://homepage.mac.com/alistairbell/home/

on 9/24/02 9:15 PM, Simon Reinhardt wrote:

> You should be able to put an intake manifold from an '85-'92 Golf or
> Jetta on the Fox motor. This will move the throttle body to the other
> end of the manifold (rear of the bus), and should preclude your having
> to bang the metal out.
> Someone else mentioned the low power output of a Fox motor- this is
> true, but it's largely due to the exhaust design, a 4-into-1 manifold.
> Get the manifold off of an early Dasher or Quantum, and you'll get a
> 10% power increase.
> Of course, there's no replacement for displacement, but there are a lot
> of camshaft choices out there that can help even a 1.8 do well.
> Best of all, once you're converted, you can re-use all those spiffy
> diesel parts on any 2L engine you might find...
> -Simon
>
> On Tuesday, September 24, 2002, at 08:21  PM, john Runberg wrote:
>
>> Has anyone installed a 1990 or newer Fox engine into Vanagon using the
>> diesel mounts? Did you have to bang the sheet metal to clear the
>> intake? I
>> have a line on a 90 Fox with new engine and bad tranny for a real good
>> price...
>>
>> john
>>