

| Subject: | Re: Red light blinks because of front height? |
| From: | Bruce Nadig |
| Date: | Thu, 26 Sep 2002 05:23:27 -0500 |
Javier, You didn't indicate which red light is blinking. There are several to choose from, right? I was assuming that the red light would be a brake warning light indicating that your brake fluid level is too low. The change in attitude brought about by installing new springs might explain this. Consistent with this is the fact that the light goes out under braking, when the front end comes down. The first thing I would do is check the level of fluid in the brake reservoir. Good Luck, Bruce >From: javier zavala <javierzavala1@TERRA.COM.PE> >Reply-To: javier zavala <javierzavala1@TERRA.COM.PE> >To: vanagon@GERRY.VANAGON.COM >Subject: Red light blinks because of front height? >Date: Wed, 25 Sep 2002 19:01:51 -0500 > >Hi Amigos: > > >A few weeks ago I had to change the front springs, right after that the red >light started blinking. >These springs seems higher than the originals but there weren�t much to >choose from. Now my van has the front higher than the rear for almost 1 and >a half inches and I�m starting to think that this difference is making the >blink. >ALSO have noticed that when I have to brake the blinking stops (and the >front is lower because of braking ) > >I have checked the water tanks, thermostat, thermo-switch, replaced the cap >of inner water tank; and everything looks fine. > >Please Help!!!!!!! > > >Gracias, > > >Javier _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx
Have something to add on this topic today? Revive this thread in the forum »