Thanks all who had suggestion on fixing the printing problem I have with ETKA.
This was the suggestion sent to me by Sean. I thought I would share it as it
might solve your problems. Unfortunately it did not solve my problem. Maybe a
re-install, a different version or a local printer will make it work. I will
post my results later when I have some time to fiddle.

Regards,
--Jeff Strickrott
82 Westy, South Florida

vgonman@earthlink.net wrote:

> How is that network printer set up? Is it shared from another PC, or does
> it have a network card built -in (example: HP laserjet with jet direct
> card)?
>
> I'm also running W2k and just got it to print, but I still got the
> segmentation error. I just hit OK.
>
> My network printer is an HP Laserjet w/Jet-Direct LAN card.
> I shared that printer from my own PC.
> I then went to a command prompt and typed "net use lpt2
> \\pcname\sharename" (pcname is the name of my PC and sharename is the name
> I gave to the printer I shared)
> I then installed another printer that used the same driver, but pointed it
> to lpt2.
> This new printer is the one I send the ETKA jobs to.
>
> Basically I tricked ETKA into thinking the printer was directly connected
> to the back of my PC.
>
> If your network printer is already set up in a "\\server\printer" format,
> you don't need to install the second printer, you just need to point lpt2
> to that \\server\printer addres, then go to the ports tab for your current
> printer and tell it to use lpt2. Like I said earlier, I also got the
> segmentation error, but just hit okay and it printed anyway.
>
> Let me know if you have any problems.
>
> Sean B.
> '90 V'gon, "Happy Bus", pseudo Wolfy
> '86 VW Scirocco 16v (New addition! Wahoo!)
> '79 Yamaha 750 Special (still need to get it running)
> Torrance, CA
> Join the TiiCo registry at
> HTTP://www.vgonman.com
>
> Vanagon Mailing List <vanagon@gerry.vanagon.com> wrote on 09/25/2002
> 10:23:14 AM:
>
> > I am running ETKA on windows 2000. I have a printer hooked up over the
> > network.
> >
> > Has anyone gotten the printer to work in this setup?
> >
> > I just get a popup dialog box stating "segmentation" with the choices
> > Ok, Abort or Trace.
> >
> > Regards,
> > --Jeff Strickrott