Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Proofing a Heater Core
From:George Goff
Date:Mon, 23 Sep 2002 01:48:51 EDT

In a message dated 9/23/02 12:29:14 AM, mjgarske@attbi.com writes:

<< as I've not seen it. >>

Mike,

Believe me!  It's lurking down in there.  To give you a head start on your
shopping, here are its dimensions:

2" X 6 3/16" X 17 1/8" or about 50 mm X 160 mm X 435 mm.  The connections are
side by side in the upper right corner as mounted.  They are about 1 1/4"
center-to-center, 1 1/8" long, 1/2" ID, 5/8" OD with a single barb 3/4" on
the OD.

George