Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Need more help - the dreaded flashing red light
From:David Beierl
Date:Sun, 29 Sep 2002 18:39:35 -0400

At 01:03 PM 9/28/2002, Michael Wagner wrote:
>Now I've pulled the temperature coolant sensor relay from inside the dash
>(marked 43) and replaced that, and I still have the same problem.

First check that the gauge supply voltage is correct (10v +/- 0.5v).  Low
voltage can cause the light to flash.  Assuming that's not it, if the light
flashes *with the 43 module removed* then it's unquestionably the
gauge.  Also, if the 43 module is taller than wide and the light flashes
without also pegging the needle, it's the gauge (or low gauge
voltage).  You can generally fix the gauge by removing the face, removing
the circuit board and replacing the electrolytic cap on the board,
preferably with a tantalum.  But it's a nuisance.

david

--
David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"

Have something to add on this topic today? Revive this thread in the forum »