Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Air in the system
From:Jay L Snyder
Date:Thu, 10 Oct 2002 12:13:37 -0400

He's filling through the top of the radiator bleed hole.  I've done it as a
top-off check.  I used a squeeze bottle to fill to the top of the radiator.

                                                                  Jay

DaveC <voicebox@DNAI.COM>@gerry.vanagon.com> on 10/10/2002 12:08:54 PM

Please respond to DaveC <voicebox@DNAI.COM>

Sent by:    Vanagon Mailing List <vanagon@gerry.vanagon.com>

To:    vanagon@GERRY.VANAGON.COM
cc:
Subject:    Re: Air in the system

--- Ed Sato <edsato@juno.com> wrote:
>  I don't know if anyone remembers this but awhile back I posted a
solution
>  to filling the radiator from the bleeder hole with the engine cold. You
>  use a plastic juice jug and a 3 feet length of aquarium air line.
>  Puncture the bottom of the juice jug so the hole will fit the air line
>  snugly. Put the other end in the radiator bleed hole. Fill the jug with
>  premix fluid and fill till fluid comes out the bleed hole. You won't
>  believe how fast and easy this method is. It is also fool proof. Hope
>  everyone gets it this time.
>  Aloha, Ed Sato

I don't understand this...

"filling the radiator from the bleeder hole..."

and

"Fill the jug with premix fluid and fill till fluid comes out the
bleed hole..."

Coolant in the bleed hole... fluid out the bleed hole. So, where does
the air go?

Dave
--
Dave Carpenter

"Any sufficiently advanced technology is indistinguishable from
magic." -- Arthur C. Clarke

This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law.  If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited.  Please notify the sender
by return e-mail and delete this e-mail from your system.  Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer.  This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.

 Francais Deutsch Italiano  Espanol  Portuges  Japanese  Chinese  Korean

            http://www.DuPont.com/corp/email_disclaimer.html