I always thought this was caused when the motor spins too fast. There is a
range of motion where the motor shuts off its own switch, if it is spinning
with not enough resistance it will pass the switch area from its own
momentum.
But mechanically I don't know how this could happen, the wiper has drag from
its squeegee.
Right?

Entity Jeff Strickrott spoke thus:

> Hi Ben:
>
> The intermittent features works and the wipers stop where they should. It is
> only when on regular and high speed that the wipers do not auto park. I
> thought
> that the wiper relay just controlled the intermittent feature.
>
> --Jeff
>
> BenTbtstr8@aol.com wrote:
>
>> Jeff,
>>
>> The self park feature is controlled by the wiper relay. Change that and you
>> should be ok. That is unless you have some other mechanical defect which is
>> interfering with the wiper arms operation. Most likely the relay though.
>>
>> BenT
>> <A HREF="http://hometown.aol.com/bentbtstr8/myhomepage/index.html">Vanagon
>> Cafe</A>
>

Hope that makes sense . . .

-- Rachel
http://www.Spectrumology.com
AIM Gnarlodious
ICQ 167580201