I just replaced mine on my 82 Westy, along with all the tubing. I had to
remove the following:

- instrument cluster,
- glove compartment door,
- heater duct
- wiper motor and connecting rods (for the right side nozzle). What a
pain. It was worse getting all back in. I need to do it again as the
auto-parking on the wiper motor is no longer working. I will wait until
I have forgotten how much a pain this was.

I found it easier if I had someone pull on each nozzle while I was
pushing the clips that secure them to the body. The passenger side was
the worse as it required removing the wiper motor.

Regards,
--Jeff Strickrott, South Florida
82 Westy.

John Carpenter wrote:

> Hi All,
> Is there a way to remove these nozzles from the outside of the bus?
> Or do I have to get to them from under the dash?
> Thanks,
> John C.
> SLC, UT
> 85 Westaru...