Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Rear hub tightness
From:David Beierl
Date:Tue, 12 Nov 2002 18:08:42 -0500

At 05:26 PM 11/12/2002, Stan Wilder wrote:
>Hayes Manual says 258 foot pounds. (80-83 Vanagon)
>I just ground mine off when I installed new rear axle stub bearings and
>nuts, then took the van to a truck stop to get them torqued.

It's been superceded -- we've been down this road before.  Bentley 42.4,
1991 edition has a caution box and special note that during repairs to any
vehicle prior to 25ZBH119362, install new sleeves and [10-slot] axle nuts
and torque to 500 NM/360 lb-ft.

david

--
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"