I used a Dremmel saw and cut the head off that rear bolt.  It was the
only way I found to make progress.

-------------------------
Laurence Smith
Hamilton, Ontario, Canada
90 Westy (fanumbos)
87 GL
-------------------------

> -----Original Message-----
> From: Vanagon Mailing List
> [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
> Of ok artguy
> Sent: Friday, November 29, 2002 12:27 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: HELP! Clutch slave-cylinder bolts???
>
>
> Okay, I've got the bus jacked up and torn apart, blocking
> my wife's side of
> the driveway, trying to replace the clutch slave cylinder.
> For the life of
> me, I can not figure out how to get to the rear bolt! It's
> (of course)
> turning when I try to loosen the nut, and of course all
> access to the
> underside is blocked by the bracket. Attempts to jam the
> bolthead with a
> screwdriver have been unsuccessful. It appears that I can
> remove the circlip
> for the clutch arm, and thereby remove the arm AND the
> bracket so that I can
> unbolt the slave cylinder off the bus. Is this the way to
> go? It seems that
> even if I were able to get the bolt off where it is now,
> I'd never be able
> to get it back on... Any insight is MUCH apppreciated. MTIA-
>
> JJ
> Oklahoma City
>
>
>
> _________________________________________________________________
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>