

| Subject: | Re: Bar's Leak |
| From: | populuxe |
| Date: | Wed, 4 Dec 2002 22:44:23 -0600 |
bars leak......used it on old pinto and 65 ponitiac. I know it worked on one of em. My 90 multi w/140k just started dripping day-glow green coolent(p.o. never had to deal w/this prob). I was very hesitant to use bar's leak but then figured, what'd ya got to loose?!?? Sure, MAY plug up front heater--but isn't that allot cheaper than new head(s) gaskets? the rear heater is only 65 bucks and easy to change. Checked some independent type web sites about "automotive snake oil" they agree it can repair small coolant leaks and bar's leak doesn't plug the heater core (unless it's plugged already). shook it up. dumped it in the main reservoir. guess what...since saturday no more drips. (listee's disclaimer: I did hedge my bet. had the good fortune to purchase a "hard to find" new 2.1 just in case) chris c Joseph Fortino wrote: > totaly it puts and stuffs in places and is no good after > using once. I tried to get more miles out of my leaky heads > and this stuff got pushed from the front to the back of the > van. I would never use again! the p.o used the wrong coolent at one point, plus the gaskets were a bit pushed > out on the bottom half. but i got alot of miles out of the > van before thinking a rebuild would be better after looking > at the corosion when the heads were removed. plus i was > going to use rebuilt heads instead of the AMC choice. > > I went with AMC and well it to a second seal job, because > the first only lasted 8000 in miles before i got a hair line > crack and well it just played air games after that. I'm running good now. > > btw you loose pressure in your radiator i think it clogs > the pores. > > just my story :) hope it helps > > Joe > > On 04 Dec 2002, Andrew Grebneff wrote: > > > >Has anyone ever heard of Bars Leak, > > > > > >if so .. do u think that will seal up the > > >gases that are gettin into the cooling > > >system ? > > > > Wonderful stuff for clogging your radiator!
Have something to add on this topic today? Revive this thread in the forum »