

| Subject: | Re: Fuse for light for gear identification? |
| From: | Edward Maglott |
| Date: | Mon, 9 Dec 2002 07:17:41 -0500 |
You can also take the cover over the light off instead of the whole housing. Look at this: http://buncombe.main.nc.us/~emaglott/pp011/index.htm Edward At 12/9/02 07:03 AM, you wrote: >Thanks Joel! Looks like I have to replace the bulb - thanks for the >detailed how-to info.! > >Peace, >Marla >'87 Westy Van "Morrison" > > > > > > >>From: "Joel Walker" <jwalker17@earthlink.net> >>Reply-To: "Joel Walker" <jwalker17@earthlink.net> >>To: "Marla Stelk" <mjstelk@HOTMAIL.COM> >>Subject: Re: Fuse for light for gear identification? >>Date: Sun, 8 Dec 2002 12:47:56 -0600 >> >> > The light that shows whether I'm in park, drive, >>nuetral, etc. has blown >> > somehow. Is there a fuse that is for just that or is >>there are bulb or >> > should I check the wiring? Thanks in advance - it >>makes it kind of >> > difficult driving at night. >> >>check the other lights on the dash ..like the fan >>switches and the heater levers. if they still light up, >>it's the bulb inside the shifter housing. yes, there is >>a bulb in there. kinda hard to get to. :( >> >>you have to remove the shifter housing, which means >>removing the top T-shaped handle on the shift lever ... >>it's held on by a very small hex-head screw: you need a >>set of allen wrenches, from sears. about $20 for a >>whole set (you'll never use all of them, but enough of >>them come in handy on the vw's so it's worth getting). >>there are four screws holding the housing to the floor >>under the carpet and the carpet has to be pulled up a >>bit to get the housing off ...i wound up cutting that >>little thin piece of carpet that goes between the shift >>housing and the dash panel ... i figure i wouldn't >>notice a gap back there. :) >> >>good luck! >>joel > > >_________________________________________________________________ >Tired of spam? Get advanced junk mail protection with MSN 8. >http://join.msn.com/?page=features/junkmail
Have something to add on this topic today? Revive this thread in the forum »