We have an  82 air-cooled Vanagon with a Type DK Trans.  The shift rod is
supported at the Trans on the passenger side by the guide bolt, which is
secured to the trans by a 19mm hex nut & washer.  This trans is also
identified in the Bentley Manuals as Type 091, 4 speed.  Its shifter cones
out of the trans on the drivers side and connects differently.  Also there
is a rubber boot over the guide bolt & shift rod to keep out road crud.
Hope this is clear.  Got top run, will check the list this evening.
Don

----- Original Message -----
From: Zoran Mladen <zmaninco@yahoo.com>
To: Don Bolt <Don-Bolt@WORLDNET.ATT.NET>
Sent: Wednesday, December 25, 2002 11:32 PM
Subject: Re: Clutch Judder Fixed

> Hi Don,
>
> Can you clarify what the shift rod guide bolt is?
>
> Z