

| Subject: | Re: ride heights |
| From: | Leon Korkin |
| Date: | Tue, 7 Jan 2003 09:17:59 -0800 |
I got 85 Westy with 215/75/15 LT tires and will go inside garage(barely) without letting air out. Standard garage door opening. Leon 85 Subwagen Cruiseship 1/3/03 6:08:29 AM, "Paul A. Blouin" <pablouin@OREGONCOAST.COM> wrote: >I will be storing my 2nd. '84 Westy in a relative's garage all summer in So. >Cal. It looks like I will be letting the air out of the tires to drive it >in under the door. The '68 it is replacing did fit unaided. My Westy I >keep at my house in Oregon also does not fit inside. > >I have seen Lowering springs for sale for as little as $250.00 per set. > >I have very practical reasons for wanting to lower the car. > >Does anyone have exprtience with lowering springs? >----- Original Message ----- >From: "Nock" <McNock@EASYSTREET.COM> >To: <vanagon@GERRY.VANAGON.COM> >Sent: Thursday, January 02, 2003 5:10 PM >Subject: Re: ride heights > > >> I see two types: >> >> 1) Synco owners (and some others) wanting to increase ride height to get >> more suspension travel. >> >> 2) Roadies, who seek the direct oppsite, lower ride height at the expense >of >> suspension travel. >> >> And I thought we where all in the same club. >> >> ----- Original Message ----- >> From: <mrvolkswagen@hotmail.com> >> To: "Andrew Nock" <mcnock@easystreet.com>; <vanagon@GERRY.VANAGON.COM> >> Sent: Thursday, January 02, 2003 3:51 PM >> Subject: Re: leveling van ride height /cheap way to do it >> >> >> > > Problem: I have an 85 westy with a sagging rear end. >> > >> > Allow me to share the fix I did on my '85 Vanagon. The year may not be >a >> > coincidence. Based on my experience all '85 model vans sit a bit higher >> > than the rest save a Syncro (others may want to confirm/deny). The >> > alternative would be a trip to a junk yard for different front springs. >> > >> > http://www.knology.net/~vw/vanagon/sag/ >> > >> > Chris S. >> > www.knology.net/~vw/ >> > >> > > >
Have something to add on this topic today? Revive this thread in the forum »