Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:No cold start and the shaft from the shop (long)
From:Jim Gregory
Date:Thu, 16 Jan 2003 16:59:04 EST

My Boston bob 1.9l engine is having some starting issues. No cold start and
hard warm start. Once running it works real fine.
I have swapped out the temp 2 sensor, ECU, AFM, Ignition control module. I
ran the pin test on the ECU harness, checked timing, tightened all clamps for
vacuum leaks and, checked the throttle positioning switches.

Still it is a bear to get going when temps are in the 40's. So in desperation
Tuesday I dropped it off at the VW shop that sees a lot of vanagons.
Yesterday afternoon he calls and says they THINK it's fixed but would like to
keep it overnight. He said that they made some adjustments and want to be
sure it started in the AM. Earlier this afternoon he calls and says that my
ECU, O2 sensor and temp2 are dead and thus far the bill is 300. Still he
would like to keep it overnight to be sure.

I am real sure that my ECU and temp 2 are not dead and it's not likely the o2
sensor is bad though it's 8 months old. How would you guys handle this? Keep
in mind that I am 26 and probably appear to them as a large sucker to be
taken advantage of.

      Thanks in advance for your input and insights,
                      Jim Gregory

Have something to add on this topic today? Revive this thread in the forum »