Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Diagnosing Idle stabilizer
From:David Beierl
Date:Wed, 22 Jan 2003 08:44:32 -0500

At 07:57 AM 1/22/2003, RAlanen@aol.com wrote:
>In a message dated 1/22/2003 7:50:15 AM Eastern Standard Time,
>dbeierl@attglobal.net writes:
>
>>Incidentally (or not) NTE lists the NTE185 as the proper cross for a BD438
>
>
>        That may be, what happened to arrive at the NTE 332 was that
> someone on the List sent me a message that the BD 438 should be upgraded
> to a better BD 912 so that was what was cross referenced to the NTE 332.

Ok, BD912 (15-amp rating vs 4 amps) comes in a TO-220 case with pinout BCE,
crosses to NTE332 with same case and  pinout...no opinion as to whether
it's a good replacement for the 438 -- but very possible depending on the
source (Mark Drillock or Darrell Boehler for example).  Again, I haven't
even glanced at the electrical characteristics of any of them.

cheers
david

--
David Beierl -- dbeierl@attglobal.net