It's almost impossible to measure with a multimeter as virtually every
speaker varies wildly over the audio spectrum.  If you can't ask the dealer
or manufacturor just hook it up as 8 ohms.  Less power but almost certainly
you can't hurt the speakers that way.

What kind of receiver are you using?  Reason I ask is almost all receivers
these days are solid state and don't really care much whether the speakers
are 4 or 8 ohms.

Mike

On 1/28/03 4:36 PM, "Ben McCafferty" <ben@VOLKSCAFE.COM> wrote:

> Hi out there,
> Any of you stereo buffs:  I need to determine if my home speakers are 4 or 8
> ohms, so I can set my receiver properly.  Unfortunately, there is no marking
> on the case or actual speaker anywhere, except "75 watts, magnetically
> shielded, design for t.v."
>
> I have a fairly sophisticated digital multimeter, but it only goes down to
> 200 ohms for resistance.  Is there another way I can determine what I've
> got?
>
> If it helps, they are from Rock Solid Sounds, Worthing, England, Made in
> Taiwan.
>
> Thanks in advance,
> bmc  :)
> Ben McCafferty
> ben@volkscafe.com
>
> Volks Cafe
> 1823 Soquel Avenue
> Santa Cruz, CA  95062
> 831-426-1244
> http://www.volkscafe.com
>