In a message dated 2/1/2003 12:03:49 AM Eastern Standard Time, 
LISTSERV@GERRY.VANAGON.COM writes:

> Does anyone know if there is an existing hole for a
> dome light on the passenger side?  Either above the
> front door or behind the side door?  I'd like to add
> one or two but would like to use original style lights
> if possible.
> 
       There is no official place marked out for it but there is ample room 
to install in the same location as the drivers side.  Just remove the drivers 
one, measure the hole and cut same size hole on passenger side.  Do not worry 
about the metal backing as used on the drivers side.  I've put them in 
without the metal backing and it works just fine.  Run wires from passenger 
side across the headliner to your new light.  Make sure you get the wires on 
the correct terminals so the three switch positions work as they do on the 
drivers side.

Cheers��

Frank Condelli
Almonte, Ontario, Canada
<A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper camping event, Almonte, ON, June 12 ~ 15, 2003
'87 Westy & Lionel Trains
Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/">IWCCC</A> & <A HREF="http://www.ccvwc.ca/">CCVWC</A>  
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
<A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A> �
<A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com