I have posted this question on the "spare" list, but still haven't resolved my problem.

The problem is that I have lost almost all clutch functions. Looking at the slave 
cylinder when in operation, the bracket that holds the slave cylinder slides out on the sleeve around the clutch arm towards the arm it self (2-3mm), causing the bracket to move upwards about 3-5mm. 
All bolts are tighten and the brace is in place. Should there be something that holds the bracket in place around the sleeve of the clutch arm ?

btw... it is a -86 with a 2.0 l gas engine (used to be a 2.1 l fuel injection)

 

Thanks

Per Martin