Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Changing the Cutch Master Cylinder
From:Stan Wilder
Date:Mon, 24 Feb 2003 14:19:58 -0600

Any pointers,instructional website locations, cautions, suggestions,
downright warnings, etc, would be
> appreciated. > Thanks,> John Rodgers> 88 Gl driver
-------------------------- Clip ---------------
I think this has been written up many times but here goes again.
Remove the instrument cluster cover, remove enough fluid from the brake
reservoir to get it down below the side feed out to the clutch. Trusty
turkey baster works for me.
Remove two screws from the cover on the bottom side of your steering
column.
Remove two 13mm bolts from clutch master right there behind the steering
column.
Remove the single steel line 11mm open wrench.
Remove the braided rubber line from the clutch master (catch drips on
newspaper).
I think you can take it from there.

Stan Wilder

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com