Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Changing the Cutch Master Cylinder
From:John Rodgers
Date:Mon, 24 Feb 2003 20:46:25 -0600

Stan, thanks for the input. Will give it a go Tuesday.

John Rodgers
88 Gl Driver

Stan Wilder wrote:
> Any pointers,instructional website locations, cautions, suggestions,
> downright warnings, etc, would be
>
>>appreciated. > Thanks,> John Rodgers> 88 Gl driver
>
> -------------------------- Clip ---------------
> I think this has been written up many times but here goes again.
> Remove the instrument cluster cover, remove enough fluid from the brake
> reservoir to get it down below the side feed out to the clutch. Trusty
> turkey baster works for me.
> Remove two screws from the cover on the bottom side of your steering
> column.
> Remove two 13mm bolts from clutch master right there behind the steering
> column.
> Remove the single steel line 11mm open wrench.
> Remove the braided rubber line from the clutch master (catch drips on
> newspaper).
> I think you can take it from there.
>
> Stan Wilder
>
> ________________________________________________________________
> Sign Up for Juno Platinum Internet Access Today
> Only $9.95 per month!
> Visit www.juno.com
>