A pressure bleeder is a professional tool.
Cheap versions are as little as $20.00 and then up to $250.00
I use a brake fluid bottle (16oz) with a hole in the bottom, the hole is
a tight fit (air tight) on a rubber hose that goes in and touches the top
of the brake fluid bottle.
With the hose on your bleeder the hose fills with fluid and after a few
pumps it creates a pressurized column between the bleeder and the fluid
bottle. It is actually pressurized and will squirt when you pull the hose
off the bleeder.
The hose is about 30" long and I hang the bottle assembly over the tire
so the bubbles rise and the hose supports the bottle.
That is what I use .............
You should be able to go to an auto supply and read the instruction sheet
from bleeders that they sell.
If you want a picture of my redneck pressure bleeder I'll send you one
.............. that is free, and what is better than free?

Stan Wilder
------------------ Clip ----------------------

On Sun, 02 Mar 2003 10:58:42 -0600 John Rodgers <j_rodgers@charter.net>
writes:
> Stan Wilder wrote:
>
>> Stan, how do you pressure bleed the clutch hydraulic system. What do
> I
> need to do it?
>
> Thanks,
>
> John Rodgers
> 88 GL driver
>
>
>

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com