I think you got the mounts used in apx 94 and later vw.  I was at vw parts
and your discription matches. part 1H0199262B, about 50$

a mount with the word "hyrdo" in it are more expensive, reg $90, but appear
to be only used prior to '94.

Any idea why vw moved away from what they called a "hdyro mount", to what
you have?

What you have looks like a pretty easy conversion.  Was it?

----- Original Message -----
From: "Myron Lind" <mdlind@rica.net>
To: <vanagon@GERRY.VANAGON.COM>; "Nock" <McNock@easystreet.com>
Cc: "FrankGRUN@AOL. COM" <FrankGRUN@AOL.COM>
Sent: Monday, February 24, 2003 7:29 AM
Subject: RE: potential hydraulic mounts for vanagon

> I got what I thought was a hydro Jetta mount for my TDD install. It is
> simply rubber with a lot of holes in it. It's sort of "sealed" to the
> outside air, so maybe that dampens the action inside, I don't know. It has
a
> plate near the bottom with two holes that mounts to the carrier bar (after
> modifying the bar) and one hole on the top that the motor mounts onto
(after
> modifying the motor mount arm). Do all hydro mounts have oil, or can air
be
> a fluid in this case as well?
>
> As far as resonance, I have to finish hooking things up and do a bit more
> cleanup, but something (air box [without an intake resonator]) or
> intercooler piping, etc is rattling away around 50 mph. I wouldn't define
it
> as a problem "yet". I am redoing the air intake to a larger diameter with
> two diesel resonators stuffed into the passenger side vent. Pretty tight,
> but I think it will work.
>
>
> Myron Lind
> 1982 Westy TDD
> Harrisonburg, VA
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
> Of Nock
> Sent: Monday, February 24, 2003 12:33 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: potential hydraulic mounts for vanagon
>
>
> Frank, I went browsing at the partsbin for mounts.
>
> Clear me up.  I checked a couple of saab engine mounts, and they were
priced
> at over $100
>
> I check the mounts for golf/jetta 2.0 litter manual circa , 1998, they
where
> only about $50 each,
>
> It would make "simple" sense to a green guy like me that the hyrdo mounts
> for a jetta 2.0 might well be tuned for the 2.0 liter in the ticco kit.
They
> also look as "mountable" as any.
>
> What do I not know about these mounts?
>
>