My Kirklands are 4 + 2 plies.  6 ply total.  4 in the tread and 2 in the
sidewall.  LT195-75/14 C rated.  Good for 50 psi, load rating of 93.

Jay

David Brodbeck <gull@GULL.US>@gerry.vanagon.com> on 03/10/2003 06:01:30 PM

Please respond to David Brodbeck <gull@GULL.US>

Sent by:    Vanagon Mailing List <vanagon@gerry.vanagon.com>

To:    vanagon@GERRY.VANAGON.COM
cc:
Subject:    Re: Simple tire qurestion

mark drillock wrote:

>I've never seen a 14" tire with true 6 ply sidewall. I think you are
>confused. No 4 ply sidewalls either. 1 ply is typical, 2 plies on some
>higher pressure tires and a 3 ply in a load D maybe.
>
>My Bridgestone load D, 8 ply rated, have only 2 plies in the sidewall. 3
>in the tread. 185R14.
>
>
I think "real" six-ply tires went out with bias-ply tires.  Radials use
a different construction, that's why a "six ply rated" tire doesn't
really have six plies, but can still carry the same weight a six-ply
bias ply tire could have.

This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law.  If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited.  Please notify the sender
by return e-mail and delete this e-mail from your system.  Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer.  This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.

 Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean

            http://www.DuPont.com/corp/email_disclaimer.html