Been here recently.  Check a little website I made of the improvements I made:

http://snurl.com/x3k

You will see on removal that the fridge needs to be tilted to get the vent
pipes out.  There is a point of interference between the pipes and the
cabinet above the fridge.  I cut a small piece of the plywood out while I
had the fridge out to reduce this interference.  Just used a coping saw and
made sure not to take too much out to affect the strength of the structure
too much.  Unfortunately I didn't take a picture of that.

Edward

At 11:53 AM 3/7/2003, you wrote:
>Hey all,
>
>In preparation for the upcoming hot summer camping days I need
>to get the fridge in the westy working at peak efficiency...
>
>This weekend I will pull out the fridge, replace the noisy