I just got some power steering hoses made for my I4 conversion.  I am using
an AAZ turbo Diesel with an A2 power steering pump from a Golf 2 1.6 Turbo
Diesel.  The banjo fitting is the same opening as the Vanagon unit - only
thing is the Vanagon one will not fit as there is that electrical connector
on the end.  I got the hose end changed at the hydraulic shop for $22 CAD -
the fitting was something like $4 and the silver soldering job cost me $15
the rest was some tax.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Matthew Pollard
Sent: March 18, 2003 12:02 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Power Steering Hose Fitting Size??

What is the size and type of fitting on the high-pressure power steering
hose that screws into the metal lines that go to the rack and back?  (This
would be the hose that goes from the pump to the metal line. Not the
banjo-fitting end.)

Anybody have a source for these?

I need this information for converting the power steering lines used in
the inline 4 conversions so they can bolt right up to the vanagon lines.

thanks
matthew
86 syncro westy i4

Matthew Pollard          "Racing with the wind and flirting with death
Dept. Of Chemistry        So have a cup of coffee and catch your breath"
University of Idaho
www.uidaho.edu/~poll7356