Hey Mike,

I just went through this on a Vanagon I worked on.
There are four wires for the dimmer.

Red/Yellow - primary juice
White/Black - juice from the light switch
Yellow - low beam
White - high beam

If you only have three wires, you are missing the
red-yellow, which is the key.

Z

--- Mike Ross <mjross81@SWBELL.NET> wrote:
> Well today I went out to remove the floor mounted
> headlight dimmer switch
> that the dumb previous owner installed.  It had
> three wires going to it, a
> white wire, a white wire with a black stripe, and a
> yellow wire with a black
> stripe.  Now I'm pretty sure that these wires are
> supposed to run through
> the steering column mounted turn signal / dimmer
> switch.  I know that the
> headlights work (touching one of the wires to the
> white wire with a black
> stripe turns on either the high or low beams), but I
> cannot get them to work
> when hooked through the column mounted dimmer
> switch.  I know it is not the
> dimmer / turn signal switch because that switch is
> new.  I can get the
> running lights (everything but the headlights) to
> turn on by flipping the
> switch on the gauge cluster.  Is there something I
> am missing?

__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com