Do you have an ohm meter to check continuity?  There still might be a
hairline break somewhere on the board.

Richard

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Mike Miller
Sent: Thursday, March 27, 2003 4:43 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Dash printed circuit

Well tack soldered some jumper wire over the break.  My brother
recommended
using phone wire and it seems to work OK.

So after 4 hours work I'm back with a working dash board and no high
beam
indicator light.  Back to even in other words.

Thanks for all the suggestions.

Mike