Oh, no, the indicator light is burnt out.  Otherwise I think it'd work.
Heck the clock even works now and hasn't since I got the van.  It's only 5
minutes slow and I never set it.

Thanks,

Mike

On 3/27/03 7:42 PM, "Richard Brassaw" <sendmeanemail@earthlink.net> wrote:

> Do you have an ohm meter to check continuity?  There still might be a
> hairline break somewhere on the board.
>
> Richard
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Mike Miller
> Sent: Thursday, March 27, 2003 4:43 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Dash printed circuit
>
> Well tack soldered some jumper wire over the break.  My brother
> recommended
> using phone wire and it seems to work OK.
>
> So after 4 hours work I'm back with a working dash board and no high
> beam
> indicator light.  Back to even in other words.
>
> Thanks for all the suggestions.
>
> Mike
>
>