A black spot and a long trailing black spot mean different things.
A black spot could be from the rivet making a mark, long trailing burns
are normally from rivets burning the flywheel.
If you can sand the marks out with 400 or 200 wet dry sand paper then the
surface is OK.
It cost about $35.00 to resurface a flywheel .............. I'd do it
since you're going back with a new pressure plate, disk and all that
other stuff.
I've got about 135K on my current disk and pressure plate so it might be
a long time before you see it again (if you are lucky).

Stan Wilder

On Sun, 30 Mar 2003 15:01:48 -0500 john Runberg <jrunberg@MAC.COM>
writes:
> Removed the clutch and flywheel. Looks like one spring is broke. I
> also
> found two split washers in the bellhousing yesterday when the tranny
> came
> out. Though it strange, but maybe I dropped them? Nope, there's
> signs that
> they've been tossed around in there for a bit (!).
>
> Now for the question: there are black 'spots' on the flywheel. I
> assume that
> means it needs to be resurfaced? How do I know what's normal??
>
> TIA, this list is invaluable!
>
> john
>
>

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com