When I replaced my clutch I ordered a kit from Ken at Vanagain.com.
Included in the kit was a "Clutch Seal" by name. If you order from
either him or Ron Salmon at Bus Depot, just be sure and ask for the oil
seal that fits into the case when the clutch is replaced to be included
in the order.. You should get the right one.

John Rodgers
88 GL Driver
Blake Thornton wrote:

>OK, I am gathering parts needed to do my clutch and have some questions.
>
>- Clutch Kit.  No problems here, I'll order a kit.
>
>- Main Seal: I don't know what part number this is?
>
>- Flywheel O-ring - Again, part number or size.  This (I think) is the
>O-ring right next to the main seal and next to the flywheel.
>
>- Bolts.  It seems the bolts that hook up the flywheel should be replaced,
>but I would like to know what size so I can get these before starting on
>the project.  Anyone know?
>
>- Bearings.  There are some bearings shown in the Bentley (needle
>bearings) near the flywheel.  Should I replace these?  If so, do you know
>the part numbers?
>
>- Other things such as: Manual Transmission Gasket, Manual Transmission
>Main Input Shaft Seal, Anything I'm missing?
>
>thanks for any help!!
>Blake
>84 Westy
>St Louis
>
>
>