I suspect he meant "quiet" - glue for between the pads and the caliper.

I used to rub my pads in small circles on the cement floor in my garage.
The floor was pretty rough, and close.

Gave then a nice look, and calmed any noise.

Dan Brideau

----- Original Message -----
From: "Sylvie et Germain" <reglys@SYMPATICO.CA>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, April 27, 2003 10:52 PM
Subject: Re: Brakes noisy

> What is disc-quite?
>
> ----- Original Message -----
> From: "phil cain" <bearsvw2000@YAHOO.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Sunday, April 27, 2003 9:33 PM
> Subject: Re: Brakes noisy
>
>
> > You may have glazed your pads by overheating them when
> > they were new, try a 60-80 grit sand paper over the
> > face of them to ruff the surface of the pads so that
> > the they can seat again to the rotor, also make sure
> > that you put some disc-quite on the backing plate of
> > the pads. Hope this helps. Phil
> >
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> >
>