Bad news Steve. JB Weld doesn't work well on that type of plastic.
It might work for you but it didn't work for me.
I took a Plastic elbow with 1/4" pipe threads on one side and a serrated
end on the other, screwed the threaded side into the original housing,
pushed a piece of clear tubing on the serrated end and then had a
flexible hose that proved very useful in filling my 1 gallon water jugs
and saved me about $38.00.
I used it for seven years and only purchased the replacement faucet when
I had a buyer for my Westy.
I also installed a tiny neon light to tell me when the pump was getting
power so I didn't twist that handle completely off waiting for water to
make a showing.
Oh! By the way the little elbow leaked, but it leaked into the sink so
what's the dif?.
A little Teflon tape would have filled the gaps and stopped the leak but
it leaked into the sink so what's the dif? I just never put that tape on
it.

Stan Wilder

On Mon, 12 May 2003 19:23:48 -0700 Steve W <croatoa@YAHOO.COM> writes:
> Hello,
> Would someone please tell me how to get the
> swivel extention out of the main base on my
> faucet?  I'm talking about the part the water
> comes out of that rotates on the side of the
> base, not the knob on top.  Mine broke off and
> the cheap skate in me wants to JB weld it.  Geeze
> I'm cheap....
> Steve
>
>
> =====
> Steve
> croatoa@yahoo.com
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com
>
>

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!