It looks to me like the top rubber bushing on the front shocks supplied
with the KYBs is too thin.  The metal cup bottoms out on the top of the
shock stem shoulder without compressing the bushing enough.  Unfortunately,
I have tossed my original VW  bushings away so I can't make a direct
comparison.  I assumed the bushings supplied would be matched to the new
shocks.  The bump I am getting is probably from the front suspension
unloading and the metal cup banging on the shoulder of the shock stem.  A
thicker bushing would allow more compression of the rubber and prevent the
cup from hitting the stem shoulder.  Does this make any sense?  I may try
adding a shim under the bushing or under the cup.  The bushing just doesn't
look like it is compressed enough.  The nut appears to be ran in to end of
the threads.

Jay

This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law.  If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited.  Please notify the sender
by return e-mail and delete this e-mail from your system.  Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer.  This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.

 Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean

            http://www.DuPont.com/corp/email_disclaimer.html