In a message dated 5/18/03 8:02:00 PM, blake@MATH.WUSTL.EDU writes:

<< The engine and the tranny are separated by about 1/8", but I can't seem to
get
the tranny off the studs coming from the engine on the bottom.  What gives?
Any ideas would be great. >>

Blake, my man, the engine must be cocked.  Try putting wedges in the parting
line on top and lifting the crank pulley end of the engine.  You might have
to jack around with the alignment of the engine with the X-mmission a bit.

George