I bet you're right Mark. And, different versions for the same years,
different due to mid-year changes?? My '87 Syncro Westy has the extra stalk
below the turn signal stalk. Works with magnets on the L/inside CV. My '91
Westy had the integrated t/signal and cruise.
This "magnetized" application is simple, reliable, uncomplicated, and so
far, works. But then, I didn't have any problems with the newer speedo-style
one on my '91.

Bob Stevens

http://groups.msn.com/BobsPhotoShare

----Original Message Follows----
From: "boroko" <marokus@voyager.net>
To: "Bob Stevens" <mtbiker62@HOTMAIL.COM>,<vanagon@GERRY.VANAGON.COM>
Subject: Re:      Cruise Control Problem
Date: Mon, 9 Jun 2003 19:04:37 -0500

Hi Bob,
What year Vanagon are you dealing with.  I have been giving out info about
the '86 and '87s that I have, and they have the speed sensor in the
speedometer.  Maybe there are different versions for different years.

Thanks
Mark
----- Original Message -----
From: "Bob Stevens" <mtbiker62@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, June 08, 2003 3:30 PM
Subject: Cruise Control Problem

 > I just deleted an email from Zoran Mladen (I think?) asking about the
 > magnets attached to the inner axle shaft/hub, which the Cruise pick-up
uses
 > to work. Stock, there are 4 of them. They are small and have an 1/8"
groove
 > on the outside so they can be zip tied on, as well as glued to the axle.
Any
 > magnet will do. They attach to the inner, left axle hub, which is very
close
 > to where the pick-up/sending unit is located.
 > Hope that helps.
 > Bob Stevens
 >
 > http://groups.msn.com/BobsPhotoShare
 >

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail